3M 39600 manual Box Size Set-Up, 2 - Side Drive Belts -3 - Upper Taping Head

Operation (Continued)

Box Size Set-Up

1.ADJUST DRIVE BELTS (Figure 3-2)

Place a product filled box on infeed end of machine bed with top flaps folded as shown and manually move box forward to contact lower taping head applying roller.

Turn drive belt adjustment crank to position both side drive belts against sides of box.

2.ADJUST UPPER TAPING HEAD (Figure 3-3)

Turn height adjustment crank to position upper taping head onto box. Turn clockwise to lower head, counterclockwise to raise head. Upper taping head must contact and hold top box flaps closed.

Figure 3-2 – Side Drive Belts

Figure 3-3 – Upper Taping Head

17