3M 39600 manual When machine is running, From the machine before operating

Operation (Continued)

3.POSITION COMPRESSION ROLLERS (Figure 3-4)

The top flap compression rollers have an adjustable slide mounting to provide side compression through the full range of box widths.

Manually move box forward so front of box is aligned with top flap compression rollers.

Adjust the compression rollers against top edge of box and tighten knobs to secure rollers in operating position.

CAUTION – Hands can be injured or caught between compression rollers and box. Keep hands away from this area

when machine is running.

4.RUN BOXES TO CHECK ADJUSTMENT (Figure 3-5)

CAUTION – Be sure all packaging materials and tools are removed

from the machine before operating.

Push electrical switch "On" to start drive belts.

Move box forward under upper taping head until it is taken away by drive belts. If box is hard to move under head or is crushed, raise head slightly.

If the box movement is jerky or stops under the upper head, move the side drive belts in slightly to add more pressure between the box and drive belts.

Note –If drive belts are allowed to slip on box, excessive belt wear will occur.

Figure 3-4 – Top Flap Compression Rollers

Figure 3-5 – Check Adjustment

18