3M 39600 manual 4 - Stop and Off/On Labels, The Safety Instructions label, shown in

Important Safeguards (Continued)

The "Stop" and "Off/On" labels, are attached next to the switches as shown in Figure 1-4. These labels remind operators and casual personnel of the function of these switches.

Figure 1-4 – Stop and Off/On Labels

The "Safety Instructions" label, shown in

Figure 1-5, is attached to the top, front of the upper assembly. The label provides convenient safeguard instructions for the operator and service personnel.

Figure 1-5 – Safety Instructions Label

The "Operating Notice" label, shown in Figure 1-6, is located on top of both drive belt assemblies to remind operators of belt adjustment procedures.

Figure 1-6 – Operating Notice Label

The "Up/Down/Lock" and "Out/In" labels, shown in Figure 1-7, are attached next to the crank handles that raise and lower the upper assembly (taping head) and move the belts in and out to match box width.

Figure 1-7 – Operating Labels

4