3M eg3, eg4 user manual Technical Support

46

	CHAPTER
Technical Support	6
LED indicator: disable/enable

Technical Support

Some users may prefer to turn off the LED indicator.

To disable this feature, open QSP-II and select the Setup button. On the dosimeter tab, under Dose% indicator LED uncheck the following:

Alarm Enable

Alarm enable: Will disable the flashing red LED when the threshold entered exceeds the designated value during run mode. (If checked, red LED will flash.)

Heartbeat enable: Will disable the flashing green LED the dosimeter is running. (If checked, a green LED will not flash.)

∙NOTE: For more information, see section on Dosimeter Settings, page 25.

053-644, Rev E Page 46 eg4 & eg3