3M eg3, eg4 user manual Logging

18

Views on the Edge

Logging

eg4 model only logs at one minute intervals and includes the following measurements:

∙Meter 1 logs Lavg/Leq, Lcpk, and Lasmx

∙Meter 2 logs Lavg/Leq

If the dosimeter runs for one hour, then it will log 60 Lavg/Leq results, and 60 Lasmax/Lcpk levels. In DMS, you can customize the logged data chart results by checking Lavg/Leq,

Lcpk, and/or Lasmax measurement values when using the button.

The Edge is a user-friendly and customizable dosimeter. In DMS, you may select the appropriate measurement values or views to appear or not appear on the display of your dosimeter using the Display Setup configuration as displayed below. Table 3-1 briefly identifies the displayed data values and views with a brief definition. (See the glossary for additional information of these terms.)

Note: The measurements/parameters are viewable in charts and graphs in DMS when downloaded.

Edge: customize what appears on the display

Measurements/parameters which appear on the Edge

053-644, Rev E Page 18 eg4 & eg3