Getting Started
Getting Started
When You First Plug in
Your Phone
The 480i automatically begins the startup sequence as soon as it is connected. The phone goes through this process the first time you plug in your phone and every time you restart your phone. The first screen to display is the Aastra splash screen.
Updating Your Phone
After displaying the Aastra splash screen, the 480i checks settings and checks for new configuration and firmware updates on the configuration server. If a new update is found, the phone displays the update it is installing (either "Updating Config" or "New Firmware"). This may take a few moments while the configuration server downloads the latest updates. Your system or network administrator manages the updates for the IP phones on the configuration server.
Important! Do not unplug or remove power from the phone while it is checking and installing
firmware.
Startup Screens
After the phonedisplays the
Aastra splash screen, or after
downloadingan update(if an update was available), the phone displays the Idle State screen.
Note: The Idle State screen on your phone may not look exactly as the figure above. The softkeys and configuration shown are an example of what could be set up on your phone by your system administrator.
480i IP Phone User Guide 3
