The multiline function
Communicating with the multiline function when attendant console enabled
Answering a call:
KEY 1
KEY 1
Answering a second call:
KEY 2
When a call arrives on your set programmed in multiline mode, the lamp associated with the customized key blinks.
Caution : the set doesn’t ring.
-Press this programmed key to talk to the caller. The lamp associated with the key switches to steady illumination. The display presents the caller's identity.
If another correspondent initiates a call on the second line, you will hear a beep and the lamp of a second key will flash.
- Press the programmed key associated with the blinking lamp.
KEY 2
KEY 1
Switching from one correspondent to another:
KEY 2
KEY 1
You will be connected to the second caller.
The key lamp lights up and the display shows the identity of the correspondent on the other end of the line.
The first correspondent will be placed on hold.
The lamp associated with this key flashes.
Suppose you are talking to one correspondent and another correspondent is on hold.
- Press the programmed key associated with the flashing lamp.
The key lamp lights up and the display shows the identity of the correspondent on the other end of the line.
The lamp associated with this key flashes.
Communicating with the multiline function when attendant console disabled
Answering a call:
KEY 1
KEY 1
When a call arrives on your set programmed in multiline mode, the set rings and the lamp associated with the customized key blinks.
-Press this programmed key to talk to the caller. The lamp associated with the key switches to steady illumination. The display presents the caller's identity
44
