Using the attendant console
Using the trace function:
Trace
Storing a correspondent’s number:
Memory
Suppose you want the number of the called or calling corres- pondent (internal or external) to be registered in the log, to identify a nuisance call, for example.
1 - Press the
2 - Press the Trace interactive key.
The number will automatically be stored in the log, which can be consulted by the system operator.
You can save the distant correspondent's number to a programmable key, whether the call is incoming or outgoing.
1 - Press (successively) the
2 - Press the Memory interactive key.
M. DUPONT
3 - Press a programmable key.
The number will automatically be stored, and can be dialled by pressing the programmable key in question.
Note: Write the correspondent's name on the label beside the programmable key.
Ending a call
- Press the red key.
If the set is in hands free mode, the lamp goes out.
The correspondent is released and the call ended.
Note: when the attendant console returns to idle mode following a call, the display remains clear for a few seconds. However, the attendant console continues to function normally and any operations (such as answering a call) are registered.
24