Aastra Telecom M760E Using the interactive keys

Description

.To invoke a function, press the interactive key associated with

the desired function (Comm, for example).

In certain cases, the number of functions available can be grea-

ter than five.

.To invoke subsequent functions,

press the interactive key -->or More.

.To invoke preceding functions,

press the interactive key <--.

At any time,

.to return to previously display, press Previous,

.to return to idle display, press Content.

Using the interactive keys

-->

<--

PE2:00 PE1:00 INT: 00 TL:01

Comm Status Funct. More

Comm

The display comprises one line of information and a second showing the functions available

through the interactive keys.Each function shown on the second line of the display is assigned

to an interactive key.

Note:in some cases, some interactive keys may not be assigned to any function.

Content

Contents

Main Page Page Page Page Page Your M760E - attendant console Connections Recommendations and safety Accessories for the M760E* Installing the attendant console Page Presentation of the M760E Telephone handset Interactive display Interactive keys Message lamp Attendant console user keys: Dialling keypad Alphabetic keypad Attendant console user keys Microphone Green key Red key Directory key Programming key Loudspeaker key Mute key The interactive display Using the interactive keys Using the hands free mode Using the micro-headset mode Using the prenumbering mode Using the loudspeaker mode Adjusting the listening volume Calling by name a correspondent listed in the internal or external directories* name xx Calling an abbreviated number* 3xxx Enabling/disabling the attendant console Page Answering calls Page Page Making a call Page During a call Page Page Ending a call Reserving external lines* Programming and managing the system* Wording Page DDMMYYYY Using the hotel function* HH MM SS Page HH MM Page Displaying calls* Displaying the status of trunk lines* Notifying a corespondent Monitoring grouped lines* Programming a key Page sequence Deleting, modifying and exiting programming Identifying programmed keys Programming the supervision function Communicating with the supervision function The multikey function Programming the multikey function The multiline function* Programming the multiline function Page Communicating with the multiline function when attendant console enabled Communicating with the multiline function when attendant console disabled Page Choosing the display language Setting the display contrast Choosing and adjusting the set ring Choosing the incoming call signalling method Adjusting the key beep volume Glossary (words to know) A problem? Check