The programmable keys
Modify
<- Start
End
-Press the Modify interactive key and resume programming as explained above, in order to modify the programming displayed.
-Press the <- Start interactive key to resume at the beginning, in order to program another key.
-Press the End interactive key to exit programming mode.
Reminder: during programming,
-pressing the red key aborts the setting in progress;
-two keystrokes on the red key terminates
the programming sequence.
Identifying programmed keys
PE2:02 | PE1:00 INT:01 | TL:00 |
Comm | Status Funct. | More |
OVERLOAD | ON :/OFF |
CCO1 | PUBLIC |
EXCHANGE 1 | |
CCO2 | PUBLIC |
EXCHANGE 2 | |
CCO3 | TIE LINES |
CCO4 | SERVICES |
LINES | |
MAJOR |
|
ALARM |
|
RESERVED |
|
LINES |
|
CCO5 | Assistant |
CCO6 | Show room |
| Shop |
Label
The paper label enables you to mark the names of correspondents or functions programmed on each group of 10 keys.
Caution: use the specific attendant label; the name of programmed user keys are printed.
1 - Remove the transparent cover over the label, by lifting the bottom of the label (insert a pointed object into each notch one after the other).
2 - Write the name of the programmed correspondent or function on the label, next to the key.
3 - Refit the transparent cover in position.
38