Accton Technology AC-IG2004W manual Installation, Description

Installation

Although access speed to the Internet is determined by the modem type connected to your CheetahAccess Wireless Gateway, data passing between devices connected to your local area network can run up to 100 Mbps over the Fast Ethernet ports.

The CheetahAccess Wireless Gateway includes an LED display on the front panel for system power and port indications that simplifies installation and network troubleshooting. It also provides three RJ-45 LAN ports, one RJ-45 WAN port, one RS-232 serial port, one parallel printer port, as well as two antennas on the rear panel.

The following figure shows the components of the CheetahAccess Wireless Gateway:

	Printer Port	Console Port WAN Port LAN Ports Power Input
Figure 2-1. Front and Rear Panels
Item	Description
LEDs	Power, WLAN, WAN and LAN port status indicators.
	(See “Verify Port Status” on page 2-8.)
Wireless	Dual antennas provide optimal reception by dynamically choosing the best antenna
Antennas	for each client.
Reset	Use this button to reset the power and restore the default factory settings.
Button
Printer Port	Parallel port (25-pins, D-type, female). Connect the shared printer to this port.
COM Port	Serial port (9-pins, D-type, male). Connect your ISDN TA or 56K analog modem to
	this port.

2-2