Description of Hardware

 

 

Item

Description

 

 

WAN Port

WAN port (RJ-45). Connect your Cable modem, xDSL modem, or an Ethernet

 

router to this port.

 

 

LAN Ports

Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub or switch) on your

 

local area network to these ports.

 

 

Power Inlet

Connect the included power adapter to this inlet.

 

Warning: The included power adapter is 5 V / 2 A DC. Using the wrong type of

 

power adapter may cause damage.

 

 

Three RJ-45 ports for connection to a 10BASE-T/100BASE-TX Ethernet Local Area Network (LAN). These ports can auto- negotiate the operating speed to 10/ 100 Mbps, the mode to half/full duplex, and the pin signals to MDI/MDI-X (i.e., allowing these ports to be connected to any network device with straight-through cable). These ports can be connected directly to a PC or to a server equipped with an Ethernet network interface card, or to a networking device such as an Ethernet hub or switch.

One RJ-45 port for connection to an xDSL or Cable modem. This port is fixed at 10 Mbps, full duplex. Use a Category 5 cable to connect this WAN port to a xDSL or Cable modem.

One RS-232 serial port to connect to an ISDN Terminal Adapter (TA) or to a PSTN analog modem.

One parallel printer port that can be connected to a printer. This printer can then be shared by any LAN/WLAN users.

Two antennas (dipole, omni-directional).

2-3

Page 15
Image 15
Accton Technology AC-IG2004W manual Description of Hardware