Security
The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.
NOTE: System BIOS does not support Trusted Platform Module (TPM).
|
|
|
| InsydeH20 Setup Utility | Rev. 3.5 | ||
| Information | Main | Security | Boot | Exit |
|
|
| Supervisor Password Is |
| Clear | Item Specific Help |
| ||
|
|
|
| ||||
|
|
|
| ||||
| User Password Is |
| Clear | Install or Change the |
| ||
| SATA Port 0 Disk Status |
| Frozen |
| |||
|
|
|
|
|
| password and the length |
|
| Set Supervisor Password |
|
| of password must be |
| ||
| Set User Password |
|
| greater than one word. |
| ||
| Set SATA Port 0 HDD Password |
|
|
| |||
| Power on Password |
| [Disabled] |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
F1 Help | Select | Item | F5/F6 | Change | Values | F9 | Setup | Default |
ESC Exit | Select | Menu | Enter | Select | SubMenu | F10 | Save | and Exit |
The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Parameter | Description | Option |
|
|
|
Supervisor Password Is | Shows the setting of the supervisor password | Clear |
User Password Is | Shows the setting of the user password. | Clear |
|
|
|
SATA Port 0 Disk Status | Shows the setting of the SATA Port Disk Status | Frozen |
|
|
|
Set Supervisor Password | Press Enter to set the supervisor password. When | N/A |
| supervisor password is set, the BIOS Setup Utility is |
|
| protected from unauthorized access. The user can not |
|
| either enter the Setup menu nor change the value of |
|
| parameters. |
|
|
|
|
Set User Password | Press Enter to set the user password. When user | N/A |
| password is set, this password protects the BIOS Setup |
|
| Utility from unauthorized access. The user can enter |
|
| Setup menu only and does not have right to change the |
|
| value of parameters except for the date and time. |
|
|
|
|
Set SATA Port 0 HDD | Enter SATA Port 0 HDD Password. | N/A |
Password |
|
|
|
|
|
Power on Password | Defines whether a power on password is required. | Disabled or |
| When the system is first turned on it will prompt for a | Enabled |
| password. Without a password the computer will not |
|
| continue to boot. |
|
|
|
|
NOTE: When prompted to enter a password, you have three tries before the system halts. If you forget your password, you may have to return your notebook computer to your dealer to reset it.
28 | Chapter 2 |
