Setting a Password

Follow these steps as you set the user or the supervisor password:

1.Use the and keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears:

Set Supervisor Password

Enter New Password

[

 

]

 

Confirm New Password

[

 

]

2.Type a password in the “Enter New Password” field. The password length can not exceed 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the “Confirm New Password” field.

IMPORTANT:Be very careful when typing your password because the characters do not appear on the screen.

3.Press Enter. After setting the password, the computer sets the Supervisor Password parameter to “Set”.

4.If desired, you can opt to enable the Power on Password parameter.

5.When you are done, press F10 to save the changes and exit the BIOS Setup Utility.

Removing a Password

Follow these steps:

1.Use the and keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears:

Set Supervisor Password

Enter Current Password

[

 

]

 

Enter New Password

[

 

]

Confirm New Password

[

]

2.Type the current password in the Enter Current Password field and press Enter.

3.Press Enter twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Supervisor Password parameter to “Clear”.

4.After all changes are made, save and exit the BIOS Setup Utility.

Chapter 2

29

Page 39
Image 39
Acer 5251, 5551G manual Setting a Password, Removing a Password