Using the LAN MAC EEPROM Utility
You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode.
1.Use a text editor (for example: Notepad) to open the MAC.CFG file. You can see the MAC.CFG contents as below:
WriteData = ‘001122334455' | MAC value |
StartAddr=7A | MAC address |
WriteLeng=6 | MAC value length |
KeepByte=0 | don’t care |
2.In DOS mode, run the MAC.BAT file to write MAC values to eeprom.
Chapter 2 | 41 |
