133
Server boot does not complete POST
Do the following:
•Make sure the VRMs are plugged in and the pins are not bent.
•Make sure the CPU is properly seated.
•Check the BIOS release notes to ensure the BIOS installed on the platform supports the stepping and the family of processors currently installed.
•Make sure the memory boards are populated according to system requirements.
Server does not recognize all of the processors installed
Do the following:
•Make sure the VRMs are plugged in and the pins are not bent.
•Make sure the CPU is properly seated.
HDD activity indicator does not light.
Do the following:
•Make sure the drive is not disabled in the BIOS setup utility.
•Make sure the drive’s power and data cables are connected correctly.
•Make sure the drive is compatible.
•Make sure you have not exceeded the power budget for the server.
•If using SCSI drives, make sure that each SCSI ID number is unique on the SCSI bus. See your drive documentation for details on setting the SCSI ID for your drives.
•If using a RAID configuration with SCSI drives, make sure the RAID card is installed correctly.
If you have installed one or more hard drives in the system, do the following:
•Make sure the power and signal cables are connected correctly.
