80

3 System upgrade

RAID activation key

Removing the RAID activation key

1Observe the ESD precautions and pre-installation instructions described on page 33.

2Remove the memory boards or memory air baffles from DIMM slots C and D. See “Cold Removal of Memory Board” on page 70 and “Removing a memory board air baffle” on page 42.

3If a PCI card is installed in PCI-X Slot 7, remove the card. For instructions on removing a PCI card, see page 76.

4Insert the tip of a small flat-bladed screwdriver under the plastic tab on the retainer holding the activation key to the mainboard.

5Gently push down to detach the activation key.

6Store the activation key in an anti-static bag.

7Replace the memory board air baffle.

8Replace the PCI card.

9Observe the post-installation instructions described on page 34.

Installing the RAID activation key

1Observe the ESD precautions and pre-installation instructions described on page 33.

2Remove the memory boards or memory air baffles from DIMM slots C and D. See “Cold Removal of Memory Board” on page 70 and “Removing a memory board air baffle” on page 42.

3If a PCI card is installed in PCI-X Slot 7, remove the card. For instructions on removing a PCI card, see page 76.

4Remove the RAID activation key from its protective packaging.

Page 90
Image 90
Acer R910 manual Removing the RAID activation key, Installing the RAID activation key