Acer S3811 manual Integrated Peripherals, Onboard Graphics Controller, Disabled, ↑↓→← ： Move

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.

CMOS Setup Utility

Integrated Peripherals

		Item Help
Onboard SATA Controller	Enabled
Onboard SATA Mode	AHCI	Options
Onboard USB Controller	Enabled	Enabled
Legacy USB Support	Enabled	Disabled
USB Storage Emulation	Auto
Onboard Graphics Controller	Disabled
Onboard Audio Controller	Enabled
Onboard LAN Controller	Enabled
Onboard LAN Option ROM	Disabled

↑↓→←：Move	Enter：Select +/-/：Value F10：Save & Exit Setup
Esc： Exit	F1：General Help	F9：Load Default Settings

OnBoard SATA Mode (AHCI)

Use this item to select the onboard SATA mode.

OnBoard SATA Controller (Enabled)

This item allows you to enable or disable the onboard SATA controller.

OnBoard USB Controller (Enabled)

Use this item to enable or disable the use of USB controller.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB device at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.

USB Storage Emulation (Auto)

If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD (Ex.ZIP drive).

Onboard Audio Controller (Enabled)

This item enables or disables the onboard audio controller.

Onboard LAN Controller (Enabled)

Use this item to enable or disable the Onboard LAN.

Onboard LAN Option ROM (Disabled)

This item enables or disables the onboard LAN option ROM function.

Press <Esc> to return to the main menu setting page.

27