Power Management Setup
This page sets up some parameters for system power management operation.
CMOS Setup Utility
Power Management Setup
|
|
|
| Item Help |
ACPI Suspend Mode |
| S3 (STR) |
|
|
|
|
| ||
|
|
|
| Select the ACPI |
Deep Power off mode |
| Enabled |
| |
Power On by RTC Alarm |
| Disabled |
| state used for |
|
|
|
| System Suspend. |
Power On by PCIE Devices |
| Disabled |
| |
Wake Up by PS/2 KB/Mouse |
| Enabled |
|
|
Wake Up by USB KB/Mouse |
| Enabled |
|
|
Restore On AC Power Loss |
| Last State |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ↑↓→←：Move | Enter：Select |
|
| |
|
| Esc： Exit | F1：General Help | F9：Load Default Settings |
|
|
|
|
|
|
|
|
|
ACPI Suspend Type (S3 (STR))
Use this item to define how your system suspends. In the default, S1 (POS), the suspend mode is equivalent to a software power down. If you select S3 (STR), the suspend mode is suspend to RAM, i.e., the system shuts down with the exception of a refresh current to the system memory.
Deep Power Off Mode (Enabled)
Under ACPI (Advanced Configuration and Power management Interface) you can create a software power down. In a software power down, the system can be resumed by Wake Up Alarms. This item lets you install a software power down that is controlled by the power button on your system. If the item is set to
Power On by RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the system can automatically resume at a fixed time based on the system’s RTC (real time clock). Use the items below this one to set the date and time of the
Power On by PCIE Devices (Disabled)
The system can be turned off with a software command. If you enable this item, the system can automatically resume if there is an incoming call on the PCIE LAN card. You must use an ATX power supply in order to use this feature. Use this item to do
Wake Up by PS/2 KB/Mouse (Enabled)
This item enables or disables you to allow keyboard or mouse activity to awaken the system from power saving mode.
Wake Up by USB KB/Mouse (Enabled)
This item allows you to enable/disable the USB device wakeup function from S3 mode.
28
