Actiontec
Gateway Features
This section contains a quick description of the Gateway’s lights and switches.
Power Light - The Power Light displays the Gateway’s current status. If the Power Light glows steadily green, the Gateway is receiving power and fully operational. When the Power Light is rapidly flashing, the Gateway is initializing. If the Power Light is not illuminated when the power cord is plugged in, the Gateway has suf- fered a critical error and technical support should be contacted.
Internet Light - When the Internet Light glows steadily, the Gateway is connected to the DSL provider. When it flashes, data is being send via the WAN port.
Wireless Light - When the Wireless Light glows steadily, the Gateway is ready for wireless networking.
Ethernet Network Light - The Ethernet Network Light s glow when a network link is established with a computer. A flashing Light signifies network traffic across the specific Ethernet connection.
Reset Switch - Depressing the reset switch for one or two seconds will power cycle (similar to unplugging and then plugging in the Gateway’s power cord) the Gateway. To restore the Gateway’s factory default settings, depress and hold the Reset Switch for approximately 10 seconds. The reset process will start about 10 seconds after releasing the Reset Switch.
Warning: Do not unplug the power cord from the Gateway during the reset process. Doing so may result in permanent damage to the Gateway.
32
