Actiontec
DSL Settings
To access DSL Settings, select DSL Settings from the “Utilities” screen. The Gateway’s VPI, VCI, and Mode settings can be changed from here. Actiontec recom- mends not changing these values without consulting the Internet Service Provider (ISP).
Restore Default Settings
To restore the Gateway to its factory default settings, select Restore Default Settings from the “Utilities” screen. When the “Restore Default Settings” screen appears, click Restore Default Settings. Any changes made to the Gateway’s settings will be lost and the factory default settings will be restored. During this process, the Gateway’s power LED flashes and the Gateway is disabled.
Warning: Do not unplug the power cord from the Gateway during the Restore Default Settings process. Doing so may result in permanent damage to the Gateway.
When the power LED stops flashing and glows steadily green, the Gateway is fully operational.
60
