Actiontec
Actiontec strongly recommends leaving the DHCP Server option On. If the DHCP Server option is Off, ensure the IP addresses of the networked computers are on the same subnet as the IP address of the Gateway. For more information, see “DHCP Server Configuration” on page 42.
DHCP Server Configuration
Clicking Next in the “DHCP Server” screen generates the “DHCP Server Configuration” screen. Change IP address range and DNS server information here.
Beginning IP Address - the IP address at which the DHCP server starts assigning IP addresses. Actiontec recommends keeping the factory default setting (192.168.0.2).
Ending IP Address - the IP Address at which the DHCP Server stops assigning IP addresses. Actiontec recommends keeping the facto- ry default settings (192.168.0.254).
The beginning and ending IP addresses define the IP address range of the Gateway. If the default values are left intact, the Gateway supplies a unique IP address between 192.168.0.2 and 192.168.0.254 to each computer on the net- work. Note that the first three groups of numbers of the addresses are identical; this means they are on the same subnet. The IP address of the Gateway must be on the same subnet as the IP address range it generates. For instance, if the Gateway’s IP address is changed to 10.33.222.1, set the beginning IP address to 10.33.222.2, and the ending IP address to 10.33.222.254.
DNS (Dynamic or Static) - the type of DNS server provided by the Internet Service Provider (ISP). If the ISP provided DNS server information, select the type here. If not, leave as is.
DNS Server 1 - the primary DNS server provided by the Internet Service Provider (ISP). If the ISP provided DNS server informa- tion, enter it here. If not, leave the text box intact.
42
