Part II
36
Step 3
Exercise Intensity (blinking)
-Press STR Button B or STP/RESET Button C to select HI (High), MED (Median) or LO (Low).
-Press MODE/NXT Button D to go to Step 5.
Step 4
MET Parameter (blinking)
-Press STR Button B or STP/RESET Button C to adjust the value. (Refer to page85 to determine your MET Parameter).
-Press MODE/NXT Button D to proceed to the next item.
Step 5
Drink Interval Timer (blinking)
The watch will remind you to drink during exercise if the timer is set.
-Press STR Button B or STP/RESET Button C to adjust the value (Range: OFF, 1 to 60minutes).
-Press MODE/NXT Button D to back to the "Fluid Loss ON" display.
B
LAP
D 
C
B
LAP
D 
C
B
LAP
D 
C
