Step 2 (Optional) | B | |
Upper Limit (blinking) | ||
LAP |
-Press STR Button B or STP/RESET Button C to adjust the value.
- Press MODE/NXT Button | D | to proceed to the | D | C | ||
|
| |||||
next item. |
|
|
|
|
| |
Step 3 (Optional) |
|
|
|
| B | |
|
|
|
|
| ||
Lower Limit (blinking) |
|
|
| LAP |
| |
- Press STR Button B or STP/RESET Button | C |
|
| |||
to adjust the value. |
|
|
| D | C | |
- Press MODE/NXT Button | D | to exit and return | ||||
|
| |||||
to the Heart Rate Mode. |
|
|
|
|
| |
Note: Press SET Button | A | to toggle the | heart rate limit in BPM | or | ||
Percentage of your Maximum Heart Rate in the Setting Mode.
Part II
Setting the Target Zone Alarm
If you set the Target Zone Alarm to ON, the watch will beep when you are above or below the selected Target Zone. From the Select TZ Mode, Press STR Button B to select a desired Target Zone, then press & hold STP/RESET Button C to set the alarm to ON or OFF. ON is indicated by the "
" icon.
From the Select TZ Mode, press MODE/NXT Button D repeatedly to return to the Analog Time Display.
45
