Step 1: Clamp the PC Interface & Charger Connector to your watch with the other end connect to the PC Interface & Charger. Make sure the three pins in the clamp are properly in contact with the contacting points on the watch. (as shown in Figure 1)
Fig.1
Part II
Step 2: Plug the USB connector to your PC, with the other end to the PC Interface and Charger. (as shown in Figure 2)
Fig.2
Step 3: The wordings "PC LINK" on the watch means it is ready for uploading or downloading. (as shown in Figure 3)
Fig.3
74
