Acumen manual Reset the Stopwatch, Alarms During the Exercise

Reset the Stopwatch

-Press & hold STP/RESET Button C in the Chrono Mode (when the stopwatch stops) will reset the stopwatch to zero. At the same time, your exercise data will be saved in Recall Data Mode.

Alarms During the Exercise

1. Out of Zone Alarm (Optional)

The watch will beep constantly if your heart rate is above or below the selected Target Zone. This is to remind you to speed up or slow down.

-When the stopwatch is running, press & hold STP/RESET Button C to activate/deactivate the Target Zone alarm.

OR

-When the stopwatch is stopped and has already reset to zero, press & hold

STP/RESET Button C to activate/deactivate the Target Zone Alarm.

2. In-Zone-Goal Countdown Timer Alarm (Optional)

You can set a goal time for being in your Target Zone. This In-Zone-Goal Countdown Timer is set while in the Recall Data Mode or the Program Mode. It can be set from 5 to 60 minutes. This value is set by pressing STR

Buttons B or STP/RESET Buttons C . If it is set to ON, the "" icon is displayed in the Chrono Mode as the following figure:

Part II

49