Adaptec SBC-599, SBC-596 manual

-When using 50-pin connector only, choose “Low ON/High ON” (Default)

-When using 68-pin connector only, choose “Low ON/High ON” (Default)

-When using both 50-pin & 68-pin, choose “Low OFF/High ON”

Select the default of “Low ON/High ON?” and press Enter, then use the up and down arrows to make your new selection and press Enter. Press ESC to go back to the Options menu. Press ESC again and select Yes to exit the program.

70 SBC-596/599 User's Manual