OS/2 Drivers Setup Procedure
Preliminary Steps
The following steps must be performed before you install the 65550/554 display driver:
1.OS/2 DOS Support must be installed.
2.If you previously installed SVGA support, you must reset the system to VGA mode. VGA is the default video mode enabled when OS/2 is installed.
To restore VGA mode, use Selective Install and select VGA for Primary Display. For more information on this procedure, see the section on Changing Display Adapter Support in the OS/2 User’s Guide.
Installing from Diskette
To install this driver, do the following steps:
1.Open an OS/2 full screen or windowed session.
2.Place the Supporting
3.At the OS/2 command prompt, type the following commands to copy the files to the OS/2 drive:
Type:
"model name": the model number of your product
When the Setup Program is completed, you will need to perform a shutdown and then restart the system in order for changes to take effect.
Chapter 5 PCI SVGA Setup
