
System Configuration | |
|
|
To log on to the maintenance terminal console screen:
1Press the SPACEBAR several times to display the Logon Password screen (Figure 12).
Figure 12. Logon Password Screen
The ENTER key is the factory default password. If you establish a different password, you must type the new password (single word, no spaces, up to eight characters) on a subsequent log on. If the system does not respond, verify that the Hardware Flow Control of the maintenance terminal is set to NONE.
2Type the password at the prompt or press ENTER if a password has not been customized. The console screen menu bar displays (Figure 13).
Figure 13. Console Screen Menu Bar
August 9, 2002 | 27 |