ADC ETU-751C, UTU-701C Configure LTU and NTU Interfaces, are, displays, read-only

700-701-100-02 System Configuration

Configure LTU and NTU Interfaces

Select and configure the LTU- and NTU-related operating parameters as follows:

1Type one of the following at the Config drop-down menu to display the Config LTU or NTU Interface menu:

•L for the Config LTU Interface menu (Figure 22).

•N for the Config NTU Interface menu (Figure 23).

Figure 22. Config LTU Interface Menu

Figure 23. Config NTU Interface Menu

The Data Rate/# of TSs and Beginning TS parameters in the Config LTU and NTU Interface menus are read-only displays. The Data Rate/# of TSs value is set in the Config System Settings menu as the “HDSL Payload Rate” (See Figure 21 on page 37). The Beginning TS value is 0 with 32 time slots selected (unstructured mode) and 1 when less than 32 time slots are selected (structured mode).

UTU-701 and ETU-751 List 1 August 9, 2002 39