Total Access 600 Series SHDSL IAD User Interface
#=
1
#=
1
1
#1
1
1
#1
1
1#1
Bits which are used in the source comparison. (dotted decimal format)
IP address compared to the destination address. (dotted decimal format)
Bits which are used in the destination comparison. (dotted decimal format)
IP source port number used for comparison Range: 0 to 65535. (decimal format)
Type of comparison that is performed.
=means ports equal to
not = means port not equal to
>means port greater than
<means port less than
None - means the source port is not compared
IP destination port number used for comparison Range: 0 to 65535. (decimal format)
Type of comparison that is performed
=means ports equal to
not = means port not equal to
>means port greater than
<means port less than
None - means the destination port is not compared
Protocol used for comparison. Range: 0 to 255. (decimal format)
Type of comparison that is performed
=means protocols equal to
not = means protocols not equal to
>means protocols greater than
<means protocols less than
None means the protocol is not compared
© 2002, ADTRAN, Inc. | Total Access 600 Series User Manual |
