Total Access 600 Series SHDSL IAD User Interface
Page 45
>Session
This menu maintains statistics about the active ATM PVCs.
>ARP cache
This is a listing of the currently connected Ethernet port on the LAN.
>Bridge Table
This shows the detected MAC addresses and the interface to which they are associated.
>IP Routes
This shows the current routes in the Total Access 600 and their use.
>LAN Stats
This shows traffic over the LAN interface.
>IP Stats
This shows IP traffic through the Total Access 600.
Configuring the Router – Logs
The Logs menu (Figure 14) contains logs displaying important information about the running condition of the Total Access 600. The logs can be set to capture diagnostics of error conditions only by way of a log level. The levels are divided up as follows:
level 0 - Fatal event (causes reset) level 1 - Critical event
level 2 - Error event level 3 - Warning event level 4 - Notify event level 5 - Informational event level 6 - Debugging event
Figure 14. Router/Logs Menu
© 2002, ADTRAN, Inc. | Total Access 600 Series User Manual |
