Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B

Page 22

Level

This is the security level granted to the user.

>Maint Port Menu

The Total Access 600’s VT 100 ￿￿￿￿￿ port can be accessed via an RJ-48 located on the rear panel. The setup for these ports is under this menu.

Password Protect

When set to ￿￿, the maintenance port is not password protected. When ;￿￿ (def), the Total Access 600 will prompt for a password upon startup.

Password

This is the text string that is used for comparison when password protecting the maintenance port. By default, no password is entered.

If you forget your password, type CHALLENGE in all capital letters. Call technical support and have the displayed CHALLENGE code ready.

The security level for the maintenance port is always set to 0. This gives full access to all menus.

Passwords are case-sensitive.

Instructions for Changing Passwords

Step

Action

1Select the PASSWORD field—a new PASSWORD field displays.

2Type the new password in the ENTER field.

3Type the new password again in the CONFIRM field.

The password can contain up to 12 alphanumeric characters. You can also use spaces and special characters in the password.

Total Access 600 Series User Manual

© 2002, ADTRAN, Inc.

Page 22
Image 22
ADTRAN 600 Series user manual Maint Port Menu, Level, Password Protect, Instructions for Changing Passwords Step Action