Total Access 600 Series SHDSL IAD User Interface
..
IP Routing
Step | Action | |
|
| |
1 | From the Total Access 600 main menu, select the WAN menu. (Here | |
you set up the ATM network.) | ||
| ||
|
| |
2 | Select the ATM CONFIG menu. | |
|
| |
3 | Enter the IDLE CELLS format for your network. | |
|
| |
4 | Set DATA SCRAMBLING appropriately for your network. | |
|
| |
5 | Back all the way out to the top level Total Access 600 menu, and then | |
select the ROUTER menu. | ||
| ||
|
| |
| Select CONFIGURATION. | |
6 | From the CONFIGURATION menu, you will set up addresses for your LAN | |
and WAN. | ||
| ||
| For basic IP routing, use all the default values from the GLOBAL menu. | |
|
| |
7 | From the ETHERNET menu, enter the IP menu to enter your LAN | |
configuration. | ||
| ||
|
| |
| Enter your LAN IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY | |
8 | information. | |
For this example, the IP ADDRESS is 192.168.1.2, the SUBNET MASK is | ||
| ||
| 255.255.255.0, and the DEFAULT GATEWAY is 10.25.4.10. | |
|
| |
| Arrow back to the main ROUTER CONFIGURATION menu, and select the | |
9 | WAN menu and then the ATM menu. (Here you will enter your data | |
| PVC information.) | |
|
| |
10 | Create a new PVC by entering the menu. Enter your VPI and VCI | |
values. | ||
| ||
|
| |
| From the RFC1483 IP menu, enter your LAN information. | |
11 | For this example, the FAR END IP ADDRESS is 10.25.4.9, the IP | |
| NETMASK is 255.255.255.252, and the LOCAL IP ADDRESS is 10.25.4.10. | |
|
| |
12 | Arrow back to the top level Total Access 600 menu to activate your | |
changes. | ||
| ||
|
|
Total Access 600 Series User Manual | © 2002, ADTRAN, Inc. |
