ADTRAN 600 Series user manual System Utility, Upgrade Firmware

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B

Page 24

Status

This displays the current status of the time negotiation process. If an error is displayed, check all connections and configurations to try to resolve the problem.

System Utility

Use the ￿;￿￿￿#￿￿￿￿!￿￿; menu to view and set the system parameters shown in Figure 5.

Figure 5. System Utility Menu

>Upgrade Firmware

Updates firmware when TA 600 enhancements are released. Two transfer methods are available for use in updating the Total Access 600 system controller.

Transfer Method

The two methods for upgrading are -#￿ ￿#￿and￿￿￿￿1￿ (See Appendix A. Updating Total Access 600 Firmware using XMODEM on page 54 and Appendix B. Updating Total Access 600 Firmware using TFTP on page 57 for more information.) ￿￿￿1 requires a TFTP server running somewhere on the network. The Total Access 600 starts a TFTP client function which gets the upgrade code from the TFTP server. Selecting -#￿ ￿#￿will load the upgrade code through the￿￿￿￿￿￿ port using any PC terminal emulator with xmo- dem capability.

TFTP Server Address

This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is config- ured) of the TFTP server.

TFTP Server Filename

This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the upgrade code.

Transfer Status

This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success message will be displayed here.

Total Access 600 Series User Manual © 2002, ADTRAN, Inc.