1.3.11Mechanical

Case: ABS+PC with captive mounting hardware

Plug-in screw terminal block:

Accepts 0.5 mm2 to 2.5 mm2, 1 - #12 or 2 - #14 to #22 AWG

1.3.12Environment

Operating temperature: 0 ~ 55° C (32 ~ 122° F)

Storage temperature: -25° to 85° C (-13° to 185° F)

Humidity: 5 to 95 %, non-condensing

Atmosphere: No corrosive gases

Note! Equipment will operate below 30% humidity. However, static electricity problems occur much more frequently at lower humidity levels. Make sure you take adequate precautions when you touch the equipment. Consider using ground straps, anti-static floor coverings, etc. if you use the equipment in low humidity environments.

1.3.13Software Specifications

Real Time O.S: KW ProConOS (Up to 16 cycle tasks)

Programmable Code/Data Size: up to 710 KB

1.4Dimensions

The following diagrams show the dimensions of the system unit and an I/O unit. All dimensions are in millimeters.

Figure 1.3 ADAM-5560 Dimensions

1.5LED Status

There are two LEDs on the front panel of ADAM-5560 Series Controller. The LEDs indicate operating status, as explained below:

PWR: Power indicator. This LED is on whenever the ADAM-5560 Series Controller is powered on.

RUN: Blinking while project is running, off while project is stopped.

ADAM-5560 Series User Manual

10

Page 18
Image 18
Advantech ADAM-5560 user manual Dimensions, LED Status, Mechanical, Environment, Software Specifications