
Module | ADAM-5030 |
SD Card Slot | 2 |
USB 2.0 Slot | 2 |
2.3.2Selecting Power Supply Module
ADAM-5560 Series Controller works under unregulated power source between +10 and +30 VDC. When you arrange different I/O modules on ADAM-5560 Series Con- troller’s backplane, it may require comparable power supply. Use the following steps as guidelines for selecting a power supply for your ADAM-5000 Series control sys- tem.
Refer to Table 2.2 to check the power consumption of ADAM-5000 Series Controller and each I/O module.
Table 2.2: Power Consumption of ADAM-5000 series (Main Units)
| Main Units | Description | Power |
| Consumption |
| | |
| | | |
| ADAM-5000/485 | Distributed Data Acquisition and Control System | 1.0 W |
| based on RS-485 |
| | |
| ADAM-5000 | Distributed Data Acquisition and Control System | 4.0 W |
| based on RS-485 |
| | |
| ADAM-5000/TCP | Distributed Data Acquisition and Control System | 5.0 W |
| based on Ethernet |
| | |
| ADAM-5510 | PC-Based Programmable Controller (With Battery | 1.0 W |
| Backup) |
| | |
| ADAM-5510M | Enhanced PC-Based Programmable Controller (With | 1.2 W |
| | Battery Backup) | |
| ADAM-5511 | PC-Based Programmable Controller with Modbus | 1.0 W |
| ADAM-5510E | 8-slot PC-Based Programmable Controller | 1.2 W |
| ADAM-5510/TCP | Ethernet-enabled PC-Based Programmable | 2.0 W |
| Controller |
| | |
| ADAM-5510E/TCP | 8-slot Ethernet-enabled PC-Based Programmable | 2.0 W |
| Controller |
| | |
| ADAM-5510KW | PC-based SoftLogic Controller | 1.2 W |
| ADAM-5510EKW | 8-slot PC-based SoftLogic Controller | 1.2 W |
| ADAM-5510EKW/TP | 8-slot Ethernet-enabled SoftLogic Controller | 2.0 W |
| ADAM-5560 | 8-slot Programmable Automation Controller | 17 W |
ADAM-5560 Series User Manual | 18 |