Advantech EKI-1351, EKI-1352 - page 21

15 EKI-1351/1352 User Manual
Chapter 2 Getting Started
2.3.1.2 DIN Rail Mounting
You can mount the EKI-1351/1352 on a standard DIN rail. The DIN-rail kit is screwed
on the serial device server when out of factory. If the DIN-rail kit is not screwed on the
serial device server, please screw the DIN-rail kit on the serial device server first.
First, hang the EKI-1351/1352 to the DIN-rail with angle of inclination. See below.
Figure 2.12 DIN-rail Step 1
Then, let the device down straight to slide over the rail smoothly.
Figure 2.13 DIN-rail Step 2