lMac Address: The MAC address is for the local system to identify and locate each serial device servers. This MAC address is already set before delivery from factory, hence no need for further configuration.

lIP Address, Subnet Mask, and Default Gateway: The IP address identifies your Advantech derail device server on the global network. Each EKI-1351/1352 serial device severs has one same default IP address 10.0.0.1. Obtain these specific IP address from your network administrator and then configure each Advantech serial device server with individual IP address, related Subnet Mask and Gateway Setting.

3.3.2Wireless Basics

3.3.2.1Wireless Basic Information

lFirmware Version: Here is the firmware version of the wireless module embed- ded in the EKI-1531 and EKI-1352. The wireless module firmware might affect the wireless connection. Write down the version number and provide to our cus- tomer service if you have wireless connection problems.

lMAC Address: The MAC address is for the local system to identify and locate each serial device servers. This MAC address is already set before delivery from factory, hence no need for further configuration.

3.3.2.2Association Information

lSSID: The SSID (Service Set Identity) identifies a specific wireless LAN. Before associating with a particular wireless LAN, a station must have the same SSID as its access point. This field shows the AP that the EKI-1351 or EKI-1352 is connecting. That means the user must set the specific access point’s SSID in infrastructure networks, or set the same SSID in ad hoc networks.

l BSSID: Normally, it should be the MAC Address of Access Point.

EKI-1351/1352 User Manual

28

Page 34
Image 34
Advantech EKI-1352, EKI-1351 manual Wireless Basics, Wireless Basic Information, Association Information