Advantech EKI-1351, EKI-1352

EKI-1351/1352 User Manual 52

4.1.2 Manual Mapping

Right click the serial device name on the sub-tree of Device Server List area and

select the “Manual Mapping” function.

ADAM series, EDG series, and EKI wireless series have only one IP address. You

can select the serial port on the device server and the host COM that you want to set.

Press <Map it> to establish the virtual COM port on the host.

Contents

Main Copyright Acknowledgements Product Warranty (2 years) Declaration of Conformity Technical Support and Assistance Safety Instructions Safety Precaution - Static Electricity Contents Chapter 1 Overview...............................................1 Chapter 2 Getting Started.....................................5 Chapter 3 Configuration .....................................21 Chapter 4 Setting COM Redirector ................... 49 Appendix A Quick Start......................................... 57 Page 1.1 Introduction Chapter 1 Overview 1.2 Features 1.3 Specifications Page Page 2.1 Understanding EKI-1351/1352 2.1.1 Product Description 2.1.2 COM Port Redirector (Virtual COM Port) Page 2.1.3 TCP Server Mode 2.1.4 TCP Client Mode 2.1.5 Serial Tunneling Mode 2.1.6 UDP Server/Client Mode 2.1.7 Control Mode 2.2 Hardware In this section, we will give you an overview of EKI-1351/1352 hardware and installation. 2.2.1 LED Indicators Table 2.1: EKI-1351/1352 LED Indicators Page Page 2.3 Connecting Hardware 2.3.1 Choosing the Location Page 2.3.2 Wireless Connection 2.3.3 Power Connection 2.3.4 Serial Connection 2.4 Serial Device Server Configuration Utility Table 2.2: EKI-1351/1352 Serial Pin Assignments Page Page Page Page 3.1 Configuration Utility Overview 3.2 Discovering Serial Device Servers 3.2.1 Auto Searching Page Page Page 3.3 Setting Ethernet Parameters 3.3.1 Ethernet Basic 3.3.2 Wireless Basics Page Page 3.3.3 Wireless Authentication Page 3.3.4 Wireless Advanced 3.4 Setting Serial Parameters 3.4.1 Setting Serial Port Parameters 3.4.2 Setting Virtual COM Operating Mode Parameters Page 3.4.3 Setting TCP/UDP Server/Client Operating Mode Parameters Page 3.4.4 Setting Control Operating Mode Parameters Table 3.1: AT Commands List Page 3.5.2 Port Monitor 3.6 Fulfilling Administrator Functions Page 3.6.3 Lock Device 3.6.4 Restore to Factory Default Settings Page Page Page Page 4.1 Setting COM Redirector(Virtual COM port) 4.1.1 Auto Mapping Page Page Page Page Chapter 4 Setting COM Redirector 4.2 Running Diagnostic Test Page Page A.1 Diagnostic Ad hoc Mode (With wireless module) Appendix A Quick Start A.2 Diagnostic Infrastructure Mode (Without wireless module) www.advantech.com