Chapter 4 Award BIOS Setup 41
Typematic Rate (Chars/Sec)
Set the number of times a second to repeat a keystroke when you hold
the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat
the keystroke. The settings are: 250, 500, 750, 1000.
Security Options
This category allows you to limit access to the system and Setup, or
just to Setup.
System The system will not boot and access to Setup
will be denied if the correct password is not
entered at the prompt.
Setup(default) The system will boot, but access to Setup will
be denied if the correct password is not
entered at the prompt.
APIC Mode (Advanced Programmable Interrupt Controller)
Default is Enabled.
MPS Version Control for OS
The options include 1.1 and 1.4. Default is 1.4
OS Select For DRAM > 64MB
Allows OS2 to be used with > 64 MB of DRAM. Settings are Non-OS/2
(default) and OS2. Set to OS/2 if using more than 64MB and running
OS/2.