| Contents |
|
1. Hardware Configuration | 1 | |
1.1 Introduction | 2 | |
1.2 | Specifications | 3 |
1.2.1 Standard SBC functions | 3 | |
1.2.2 Display | 4 | |
1.2.3 Mechanical and Environmental Specifications | 4 | |
1.3 | Function Block Diagram | 5 |
1.4 | Board Dimensions | 6 |
1.5 | Jumper Settings | 7 |
1.5.1 Assembling / Disassembling | 7 | |
1.5.2 Jumper Locations | 8 | |
1.5.3 Jumper Settings | 9 | |
1.5.4 CompactFlash master/slave | ||
1.5.5 Clear CMOS (JP1, pin 2,4,6) | 10 | |
1.5.6 Serial Ports (COM1 and COM2) Mode | 11 | |
1.6 | Connectors | 12 |
1.7 | Front Panel Connectors and Indicators | 14 |
1.8 | Safety Precautions | 14 |
1.9 | Installing SDRAM (SODIMMs) | 15 |
2. Connecting Peripherals | 17 | |
2.1 | IDE Device | 18 |
2.2 | CompactFlash Interface | 18 |
2.3 | VGA Display Connector | 18 |
2.4 | PS/2 Keyboard and Mouse Conn. | |
v
