
5.2.4 CMOS clear for external RTC (JP12)
Warning: To avoid damaging the computer, always turn off the power supply before setting “Clear CMOS”. Set the jumper back to “3.0 V Battery On” before turning on the power supply.
Table
* normal operation
1 2 3
Clear CMOS
1 2 3
* default setting
5.2.5 Cyrix linear mode enable (JP10)
The panel PC supports Cyrix M1 CPU with its linear access mode on L2 cache. This mode is set through JP10.
Table
* open = disable (normal operation)
2
1
closed = Cyrix linear mode
2
1
* default setting
56 |