PS/2 Mouse and Keyboard, PCI/ISA Bus Expansion

3.5 PS/2 Mouse and Keyboard

If you wish to use a full-size desktop keyboard and PS/2 mouse with your panel PC, follow these instructions:

1.Be sure the panel PC is turned off.

2.Connect the Y-shaped adapter to the PS/2 mouse and keyboard port on the rear bottom side of the rear cover. (See Fig. 3-4 and Fig. 2-6.)

3.Attach the keyboard to the 5-pin port of the Y-shaped adapter.

4.Attach the PS/2 mouse to the 6-pin female PS/2 port of the Y-shaped adapter.

5.Turn on the panel PC.

The panel PC supports PCI and ISA bus expansion cards. To integrate a new PCI or ISA bus card into your system, follow these instructions:

1.Turn off the panel PC.

2.Unscrew the two screws on the top of the PCI/ISA bus expansion slot cover, and remove this cover.

3.Remove the metal plate by unscrewing the single attaching screw.

4.Insert the PCI or ISA bus card into the PCI/ISA slot of the riser card. (See Fig. 3-6 overleaf.)

5.Run the setup program within your operating system to configure your system.

Chapter 3

Using the Panel PC