Advantech RMD-1150

RMD-1150 Series User's Manual 14

Determine the channel address of each computer. For computers

using a PS/2 mouse, connect the computer's mouse and keyboard

cables to the RMD-1150F8's connectors marked with a mouse and

keyboard respectively, as shown in figure 3.

For computers using a serial mouse, connect the DB-9 to mini-

DIN-6 adapter to the computer mouse port, then use PS/2 cables to

connect the mouse to the RMD switch, see figure 4. Connect the

computer's monitor cable to the HD-DB-15 VGA connector.

Repeat above steps for all remaining computers to be connected to

the RMD switch.

Figure 1- 3: RMD-1150F-8 computer connection

Figure 1-4: Adapter and serial mouse connection

PC with PS/2 mouse

Contents

Main Copyright notice Acknowledgements A Message to the Customer Advantech customer services Technical support 1.1 Safety Instructions, disclaimer, and warranty Note: Read these instructions. Save these instructions for later use. Page Page 1.2 Introduction RMD switch family specifications: Page 1.2.1 Features 1.2.2 Extra Features for On screen display for KVM switch Page 1.3 Configurations Page 1.4 Installation Page Page Page 1.5.2 Function key <F1> 1.5.3 Function key <F2> 1.5.4 Function key <F3> 1.5.5 Function key <F4> Page 1.5.6 ESC 1.5.7 Hot-key commands Note: Do not use the keypad at the right of the keyboard. Note: Scan Type determines whether eye mark is necessary during Auto Scan. Note: Scan Type determines whether eye mark is necessary during Manual Scan. 1.6 OSD (On-Screen-Display) Operation For LCD Monitor Page Page XII EXIT 1.7 Cascaded Configuration 1.7.1 General 1.7.2 Operation Note: Keyboard Speed option is not availab le f or multi-access models. Page Page Page Page Page Page Resolution Modes: **You might not be able to run all of the modes due to the different brand of Panel. **