Advantech RMD-1150 user manual OSD On-Screen-Display Operation For LCD Monitor, Key Definition

The RMD switch sends one to four beeps indicating scan intervals of 3, 8, 15 and 30 seconds respectively.

•To adjust keyboard typematic rate (characters/sec), this setting over-rides that of BIOS and any operating system:

left Ctrl + left Ctrl + F4

The RMD switch generates 1 to 4 beeps corresponding to 10, 15, 20 and 30 characters/sec respectively.

• Audio Stick

An optional multimedia module can be LINKed to the back of each RMD-1150F-8 for selecting microphone and stereo speaker signals. There are two options for Audio Stick:

ON and Off. When set to 'On', audio selection follows computer selection. When set to 'Off', audio selection stops following computer selection. It is useful if you want to listen to a particular computer's audio signal while operating other computers.

left Ctrl + left Ctrl + F5

The RMD-1150F-8 generates 1 or 2 beeps corresponding to On and Off respectively.

1.6OSD (On-Screen-Display) Operation For LCD Monitor

The monitor control functions are located on the bottom side of the panel. They are shown in the figure below and described in the following paragraphs.

Key Definition

1. MENU:

Use the key to select the desired adjustment item .

2. ADJUST +/- SWITCH:

Use the key to change the value for optimal viewing.

3. POWER SWITCH:

Use the power switch to turn ON or OFF power. We recommend turning your system power on first, then the LCD monitor.

RMD-1150 Series User's Manual 2 3