Advantech RMD-1150

RMD-1150 Series User's Manual 16

1.5 Operation (OSD (On-Screen-Display)

Operation For KVM Switch)

Figure 1-5: KVM portion OSD screen illustration

1.5.1 Introduction

By hitting the left <CTRL> key twice within two seconds, you may

see the 'Hotkey Menu' if it is enabled (an OSD option). Or, by

hitting the left <CTRL> key three times within two seconds, you

Contents

Main Copyright notice Acknowledgements A Message to the Customer Advantech customer services Technical support 1.1 Safety Instructions, disclaimer, and warranty Note: Read these instructions. Save these instructions for later use. Page Page 1.2 Introduction RMD switch family specifications: Page 1.2.1 Features 1.2.2 Extra Features for On screen display for KVM switch Page 1.3 Configurations Page 1.4 Installation Page Page Page 1.5.2 Function key <F1> 1.5.3 Function key <F2> 1.5.4 Function key <F3> 1.5.5 Function key <F4> Page 1.5.6 ESC 1.5.7 Hot-key commands Note: Do not use the keypad at the right of the keyboard. Note: Scan Type determines whether eye mark is necessary during Auto Scan. Note: Scan Type determines whether eye mark is necessary during Manual Scan. 1.6 OSD (On-Screen-Display) Operation For LCD Monitor Page Page XII EXIT 1.7 Cascaded Configuration 1.7.1 General 1.7.2 Operation Note: Keyboard Speed option is not availab le f or multi-access models. Page Page Page Page Page Page Resolution Modes: **You might not be able to run all of the modes due to the different brand of Panel. **