Initial Power-Up

Make sure all computers and RMD switch are powered down during installation. You must power up the RMD switch before turning on any other devices.

• For single RMD switch:

1.Apply a power adapter to the RMD switch.

2.Turn on computers.

• For cascade:

1.Apply a power adapter to the switch.

2.Apply power adapters to all Slaves.

3.Turn on computers.

Note:You may hot plug additional powered-down computer and Slave without turning existing RMD-1150F-8 or computer off after initial power up.

• Replace RMD-1150 External Console Devices

You can replace a faulty external keyboard or mouse of the RMD- 1150 switch CONSOLE port at any time without powering down the RMD switch, as long as your computers are booted with proper device driver for the new device.

RMD-1150 Series User's Manual

1 5

Page 15
Image 15
Advantech RMD-1150 user manual Initial Power-Up