and the second one is the channel address of the Slave (1~8). Left Ctrl + left Ctrl + 7

Selects a computer connected to port 7 of the RMD switch. Left Ctrl + left Ctrl + 6 + C

Selects a computer connected to port C of a Slave connected to port 6 of the RMD switch.

To start Auto Scan, automatically scan power-on computers one by one at a fixed interval:

left Ctrl + left Ctrl + F 1

When Auto Scan detects any keyboard or mouse activity, it suspends the scanning till activity stops; it then resumes with the next computer in sequence. The length of the Auto Scan interval (Scan Rate) is adjustable, see below. To abort the Auto Scan mode, press the left Ctrl key twice.

Note: Scan Type determines whether eye mark is necessary during Auto Scan.

Manual Scan enables you to manually switch back and forth between power-on computers.

left Ctrl + left Ctrl + F2

Press "$or $#$to select the previous or the next computer in sequence. And, press any other key to abort the Manual Scan.

Note: Scan Type determines whether eye mark is necessary during Manual Scan.

To adjust Scan Rate which sets the duration before switching to the next computer in

Auto Scan:

left Ctrl + left Ctrl + F3

RMD-1150 Series User's Manual

2 2

Page 22
Image 22
Advantech RMD-1150 user manual Left Ctrl + left Ctrl + F3