Manuals / Advantek Networks / Computer Equipment / Switch

Advantek Networks ANS-24RV Class of Service Configuration, MAC Address Configuration

Models: ANS-24RV

1 28

Page 4

	2.8.2 Class of Service Configuration	21
2.9 MAC Address		22
	2.9.1 MAC Address Configuration	22
2.10 Configuration		22
	2.10.1 Configuration Backup/Recovery	22
3 Console User Interface		24
3.1	Connecting to the Switch Console Port	24
3.2	Setup HyperTerminal	24
3.3	Configure Switching Hub via COM1 Port	27
	3.3.1 Switch Main Menu	27
	3.3.2 Load Default Setting	27

Page 4

Image 4

Advantek Networks ANS-24RV Class of Service Configuration, MAC Address Configuration, Configuration Backup/Recovery

Contents

24 Port Fast Ethernet Switch with VLAN and Trunking User Manual Model # ANS-24RVFCC Warning Copyright1999 All Rights ReservedCE Mark Warning TrademarksContents 2.8.2 Class of Service Configuration 2.9.1 MAC Address Configuration2.10 Configuration 2.10.1 Configuration Backup/Recovery1.2 Product Features 1.3 Package contents1. Introduction 1.1 General Description1.4 Front panel LED indicators 1.6 Power Connecting1.7 Connecting computers to the switch 1.5 Rear panel1.9 To prolong the operational life of your units 2.1 Configure system network 2. Installing the Fast Ethernet SwitchStep 2 Select “Internet Protocol TCP/IP”, and then click “Properties” 2.2 Login the Web 2.3 The SmartSwitch Home overview The window below shows the Home page of SmartSwitch2.4 Administrator 2.4.1 Authentication Configuration2.4.2 System IP Configuration In this page, you can set and update the IP Address, Subnet Mask, andGateway 2.4.3 System Status2.4.4 Load Default Setting be set to default settingprocess is completed, you will see the screen as below2.4.5 Firmware update 1 Click “Control Panel” Æ “System Management Tool” Æ “Service”2 Disable both TFTP server and DHCP server 3 Make Sure the Firewall SettingStep1 Click the “Settings” item and set base Directory 5 Press the “Update” button which is shown on the Web page 2.5 Port Management2.5.1 Port Configuration 2.5.2 Port Mirroring 2.5.3 Bandwidth Control2.5.4 Broadcast Storm Control 2.6.1 Group VLAN Setting 2.6 VLAN Setting2.6.2 Multi to 1 Setting 2.7.1 Trunk Configuration 2.7 Trunk Setting“Destination address” or “SD &DA” 2.8 QoS Setting 2.8.2 Class of Service Configuration2.8.1 Priority Mode Priority”2.9 MAC Address 2.9.1 MAC Address Configuration2.10 Configuration 2.10.1 Configuration Backup/Recovery3.2 Setup HyperTerminal 3.1 Connecting to the Switch Console Port3. Console User Interface correct icon Step 3 Select “COM1” in the “Connect using” field and then click “OK”and then click “Ok” button Page 3.3 Configure Switching Hub via COM1 Port 3.3.1 Switch Main Menu 3.3.2 Load Default SettingAfter you enter the Modular Console, the Switch Main Menu will appear This page allows user to restore default port settingsIn the 1st option to 3rd option 1. Restore switch default setting/2 Restoreto restore default settings

2.8.2 Class of Service Configuration

2.9 MAC Address

2.9.1 MAC Address Configuration

2.10 Configuration

2.10.1 Configuration Backup/Recovery

3 Console User Interface

Connecting to the Switch Console Port

Setup HyperTerminal

Configure Switching Hub via COM1 Port

3.3.1 Switch Main Menu

3.3.2 Load Default Setting